What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 02.07.2025 23:48

He then asserts :
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
It seems Mohan does not understand the difference between a comment and an Answer.
Credit cards could blow up a carefully crafted crypto compromise - Politico
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–16 [ OO OLAOYE OYEBODE ]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
[image of Common-mode choke]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Here is a simplified AC power diagram.
Bitcoin Price, XRP Fall. The House Just Introduced a New Crypto Bill. - Barron's
nine
There are two important concepts here.
This device then solves the entire problem.
Why did McLaren hope that the Ferrari pair would pit twice during the Italian Grand Prix?
A fuse is a non-resetable over current circuit protector.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Who writes and reads novels nowadays?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
What is lightning?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Astronomers discover a tiny star with a giant planet that should not exist - Earth.com
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Barnstars:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
These glowing axolotls may hold the secret to human limb regeneration - The Washington Post
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
so, what happens?
The bolt then partially travels down the line to your home.
Microsoft Starts Deleting Your Passwords In 6 Weeks—Act Now - Forbes
This is the picture of an electronic coil of wire wound around a core of magnetic material.
At one ohm, the resistor has a maximum of 1 watt power.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Why The Simpsons stopped producing Maude Flanders episodes?
This is where this question deviates from being a 'generic' question, and becomes more specific.
First Sentence:
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
NCAA approves multiple major rule changes in men's college basketball - On3.com
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
(Dc diagram shown, AC is similar).
The other is “what does a “fuse” do?”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Now when you have a certain ac resistance, then a current flows in a loop.
Edit 2024–10.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is where the MOV conducts again, and dissipated the energy.
But it can get overloaded, and no longer works.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
but I think this circuit , shows a few more pieces.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
but this device (an Inductor) … impedes the rapid changes in the current.
There are three different concepts here that are getting confused.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This one hit behind the barn.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
[old diagram got deleted by accident]
These are simplified answers to the original question, and does not change anything I wrote above.
He then describes the function of a fuse.
What does a fuse do?
One
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
The MOV will conduct when the voltage exceeds 50% of line voltage.
For this case there are devices called Metal oxide varistors (MOV).
The third is lightning and “how it gets conducted into a home.”
what exactly is a ‘surge’ protector?
2024–10–10[John johnson John Johnson ]
I post the exact comment here.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
At least they know the answer if they wanted it.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
One is “what exactly is in a ‘surge protector’ ? ”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
It also is a device that limits the change in current flow.
But… the neutral is now “floating” because of the 1 ohm resistance.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Because the load is inductive, the current lags the voltage.(by a bit).
the problem then depends on "how fast does the fuse operate?".
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
eight
a photo is worth a thousand words.
These devices are installed between the “hot” and “neutral” and protective ground.
Upvotes:
An AC voltage/ current source, and an ac inductive load.
He then describes Rainy Season and Lightning.
A circuit breaker is similar, but is resettable.
This is 'the assistant's answer'
In schematic diagrams this is the symbol for a fuse: